Photo: Yair-haklai · CC BY-SA 4.0
~1 m²
A single gram of gold can be hammered into a sheet about a square meter wide.
5 min readLast updated
The short answer
Yes. Gold is the most malleable of all metals. Gold beaters can hammer it into leaf around 0.1 micrometers thick, so thin that a single gram can be spread over roughly a square meter.
Why it's true
Malleability is the ability of a material to be hammered or pressed into thin sheets without cracking. Gold is the champion. Its atoms are arranged in a face centered cubic crystal, which allows layers of atoms to slide past each other easily, and gold does not form a brittle oxide layer that could crack.
Traditional gold beaters start with a thin ribbon of gold, cut it into small squares and stack them between sheets of special paper or membrane. They then pound the stack with heavy hammers for hours, repeatedly cutting and restacking. The finished gold leaf is often around 0.1 micrometers thick, about a thousand times thinner than a human hair.
At that thickness, a gram of gold, a piece smaller than a sugar cube, can cover about a square meter. Gold leaf is so thin that light passes through it, and it can look greenish when held up to a lamp. It is used to gild picture frames, books, buildings and even food.
By the numbers
~0.1 µm
Typical thickness of gold leaf
~1 m²
Area one gram of gold can cover
4,000+ years
How long people have made gold leaf
1064 °C
Melting point of gold
How we know
Ancient Egyptians were beating gold into leaf more than 4,000 years ago and used it to decorate furniture, statues and coffins. Gold leaf has been found in the tomb of Tutankhamun.
The craft spread across the world, from Asian temples to European cathedrals. Gold beaters formed guilds in medieval Europe, passing their skills down through generations.
Scientists in the nineteenth and twentieth centuries measured gold leaf thickness and studied why gold is so malleable. Michael Faraday experimented with gold leaf in the 1850s and noticed its odd optical properties, work that helped start the study of nanoparticles.
Today machines do some of the beating, but craftsmen in places such as Kanazawa in Japan and Florence in Italy still produce gold leaf by hand.
Why gold stays shiny
Unlike iron or copper, gold does not rust or tarnish in air. That means gold leaf stays bright for centuries, which is why ancient gilded objects still shine.
This chemical stability, together with its malleability, makes gold ideal for decoration and for some electronics.
Malleability matters in industry too. Thin gold layers coat electrical contacts, satellite parts and astronaut visors, where they reflect heat and resist corrosion.
Gold is also extremely ductile. A single gram can be drawn into a wire more than a kilometer long, according to commonly cited estimates, though such fine wire is fragile and hard to handle. In electronics, much thicker but still very fine gold wires connect chips to their packages, because gold conducts well and does not corrode.
Applying gold leaf is a craft in itself. Gilders lift the fragile sheets with a soft brush called a gilder's tip, using a little static from their hair or cheek, and lay them onto a sticky surface called size. A breath can tear or scatter the leaf, so the work is done in still air.
Worth remembering
- Gold is the most malleable metal.
- Gold leaf can be around 0.1 micrometers thick.
- One gram can cover about a square meter.
In context
Picture a gold ring weighing a few grams. If a gold beater hammered it out, it could cover a small tabletop several times over with shimmering foil. That is how far a tiny amount of gold can stretch.
A closer look
Hammering by hand
Gold beaters use hammers weighing several kilograms and strike thousands of times, keeping the stack moving so the gold spreads evenly. The work takes great skill and patience.
Between rounds, they cut the sheets and restack them, gradually thinning each piece.
Gilding the world
Gold leaf has decorated the domes of churches and mosques, the roofs of temples and the pages of medieval manuscripts.
Because it is so thin, a little gold can cover a large area, making gilding affordable even for large surfaces.
Faraday's experiments
In 1857, Michael Faraday studied how light passed through gold leaf and made colorful liquids containing tiny gold particles.
Some of his samples still exist at the Royal Institution in London, early examples of what we now call nanoscience.
Related facts
Gold medals contain only a thin layer of gold. Olympic gold medals.
Another metal with unusual properties. Mercury, a liquid metal.
A metal that behaves very differently from gold. Gallium melts in your hand.
The metal with the highest melting point. Tungsten's record.
Key terms
- Malleability
- The ability to be hammered into thin sheets.
- Gold leaf
- Gold beaten into extremely thin sheets for gilding.
- Ductility
- The ability to be drawn into wire.
Myth vs reality
Myth
Gold leaf is just gold paint.
Reality
It is real gold, hammered into extremely thin sheets.
People also ask
Why is gold so malleable?
Its crystal structure lets atoms slide past each other, and it does not form a brittle oxide.
How thin is gold leaf?
Often around 0.1 micrometers, about a thousand times thinner than a hair.
Can you eat gold leaf?
Edible gold leaf is used to decorate food. It passes through the body without being absorbed.
Why does gold leaf look green when light shines through it?
Very thin gold lets green light through more than other colors.
Is gold also ductile?
Yes. A gram of gold can be drawn into a very long, thin wire.