Photo: ArnoldReinhold · CC BY-SA 3.0
3.75 MB
The first computer hard drive stored about 3.75 megabytes and weighed around a tonne.
5 min readLast updated
The short answer
Yes. The IBM 350 Disk Storage Unit, part of the RAMAC 305 system announced in 1956, was the first commercial hard disk drive. It stored about 5 million characters, roughly 3.75 megabytes in modern terms, on fifty 24 inch disks, and weighed about a tonne.
Why it's true
Before hard drives, computers stored data mainly on punched cards and magnetic tape. Tape was cheap but slow to search, because you had to wind through it to find information. IBM engineers in San Jose, California, led by Reynold Johnson, set out to build a device that could reach any piece of data quickly.
Their answer was the IBM 350. It had a stack of fifty aluminum disks, each 24 inches, or 61 centimeters, across, coated with magnetic material and spinning at 1,200 revolutions per minute. A single moving arm read and wrote data. It could store about 5 million six bit characters, which works out to about 3.75 megabytes by modern eight bit counting.
The whole unit was about the size of two refrigerators and weighed roughly a tonne. Companies did not buy it outright but leased it, typically for around 3,200 dollars a month in 1950s money. Despite its size and cost, it changed computing by making random access storage possible.
By the numbers
1956
Year the IBM 350 was announced
~3.75 MB
Approximate storage capacity
50
Number of 24 inch disks
~1 t
Approximate weight
How we know
IBM announced the RAMAC 305 system, short for Random Access Method of Accounting and Control, in September 1956. The 350 disk unit was its storage component.
Reynold Johnson's team had worked on the problem since 1952, experimenting with materials and designs for spinning magnetic disks and fast moving heads.
Companies such as insurance firms and manufacturers used RAMAC systems for accounting and inventory, finding that they could look up records in seconds instead of hours.
In 1984, the American Society of Mechanical Engineers designated the RAMAC an International Historic Mechanical Engineering Landmark. Examples survive at the Computer History Museum in California.
Moving a megabyte
Photos from the 1950s show workers loading RAMAC units onto planes and trucks with forklifts. Moving data meant moving heavy machinery.
The RAMAC's success started an industry that went on to store much of the world's information.
Its basic principle, a magnetic head reading data from a spinning disk, survived in hard drives for decades.
The engineers who built it could hardly have imagined that their idea would one day fit in a pocket.
The read and write heads did not touch the disks. Instead they floated just above the surface on a thin cushion of air, a clever idea that let the disks spin quickly without wearing out. Every hard drive since has used a version of this trick, with heads now flying only a few nanometers above the platters, far closer than the width of a speck of dust.
IBM produced around a thousand RAMAC systems before withdrawing it in 1961, as faster and more compact designs took over. Its successors added removable disk packs, and by the 1980s hard drives small enough to fit inside personal computers had arrived, holding 5 or 10 megabytes in a box the size of a book.
Worth remembering
- The first hard drive came from IBM in 1956.
- It stored about 3.75 megabytes.
- It weighed around a tonne.
In context
A single high resolution photo on a modern phone can take up more space than the entire first hard drive could hold. Back then, storing about 3.75 megabytes required a machine that had to be moved by forklift.
A closer look
Random access
Random access means a computer can jump straight to any piece of data. With tape, finding a record near the end meant winding through everything before it.
The RAMAC's moving arm could reach any track in less than a second, a huge improvement.
Shrinking drives
Over the decades, hard drives became dramatically smaller and denser. Disks shrank from 24 inches to 3.5 and 2.5 inches across, while capacities grew to many terabytes.
A modern drive can hold millions of times more data than the IBM 350.
From disks to flash
Solid state drives, which use flash memory chips with no moving parts, have replaced hard drives in many laptops and phones.
Spinning hard drives are still common in data centers because they store large amounts of data cheaply.
Related facts
Early computers were huge in every way. ENIAC's enormous size.
Later storage packed gigabytes onto a thin disc. How much a DVD holds.
Another way of storing data on a spinning disc. CD audio.
Compression helps squeeze more into limited storage. PNG compression.
Key terms
- Hard disk drive
- A storage device that records data on spinning magnetic disks.
- Random access
- The ability to read data from any location directly.
- Megabyte
- A unit of digital storage, about a million bytes.
Myth vs reality
Myth
Early hard drives were small devices that fit in a computer.
Reality
The first one was the size of two refrigerators.
People also ask
How much did it store?
About 5 million characters, which is roughly 3.75 megabytes in modern terms.
How big was it?
About the size of two large refrigerators, weighing around a tonne.
Could you buy one?
Usually it was leased, for about 3,200 dollars a month in the 1950s.
Why was it important?
It allowed random access to data, so any record could be found quickly without winding through tape.
How fast did the disks spin?
About 1,200 revolutions per minute.